Tell us about your project
Provide the location, photos, plans and the required scope.
Home / Building strip-outs
SEGIM SCHWEIZ · SINCE 1999
Building strip-outs
Throughout Switzerland – all 26 cantons
SEGIM Schweiz Rückbau & Demontagen GmbH serves deconstruction and strip-out projects in all 26 Swiss cantons: German-speaking Switzerland, French-speaking Switzerland and Ticino. Scheduling, dates and logistics are coordinated for your project location.
Our focus:
deconstruction!
SEGIM Schweiz Rückbau & Demontagen GmbH · We work in German-speaking Switzerland, French-speaking Switzerland and Ticino. Scheduling and logistics are tailored to your site.
Partial or complete building strip-outs to the agreed handover condition.
Request a quotation ↗Strip-out: scope and technical preparation
Removal to the agreed structural shell
Non-load-bearing plasterboard, lightweight or brick partitions are removed within the agreed scope after assessment. Retained structure and areas are defined before work.
Work may include parquet, carpet and linoleum removal, removal of subfloors and screeds, and dismantling suspended ceilings, wall linings and fixed fittings.
Building services and industrial equipment dismantling
Old plumbing, electrical and ventilation installations are mechanically removed after shutdown, disconnection and clearance by the responsible specialists.
Heating systems, water heaters, tanks and industrial pipe runs are dismantled project by project. Draining, cleaning, depressurisation and documented clearances may be needed; responsibilities are agreed in advance.
Selective openings
Wall and floor openings for new layouts, service shafts or stairways are planned following technical review. Structure, reinforcement, services and permits are checked beforehand.
Execution, boundaries and any temporary supports are agreed with specialists. Changes to load-bearing elements require specialist clearance.
Building strip-out work in Switzerland
SEGIM Schweiz supports building strip-out for refurbishment and changes of use. Scope, demolition boundaries and handover condition are agreed together.
Industrial and commercial strip-out
Interior removal and building services dismantling are coordinated around use, access and operational interfaces. Strip-out to the agreed structural shell requires assessment and identification of retained elements.
Rubble disposal with regard to VVEA
Sorting, removal and disposal routes are planned after material assessment and according to project requirements. Suspect materials require separate investigation. Required disposal plans and evidence responsibilities are coordinated with the client and specialists.
Strip-out in Zurich, Aargau, Basel, Lucerne and Bern
From Regensdorf, we plan work in Zurich city and canton, Aargau, Basel, Lucerne and Bern. Projects throughout Switzerland are coordinated through agreed scheduling.
Deconstruction and strip-out in your region
Send your town or postcode, building use and scope. Scheduling, travel, site visits and dates are coordinated for your location.
Scope of work
- Removal of partitions, finishes and interior fittings.
- Orderly material removal and preparation for the following trades.
Exposed timber beams and existing structure
Video: timber floor removal
The footage shows timber floorboards being loosened and removed during strip-out work. The underlying floor structure is exposed step by step.
Requirements and preparation
Potential hazardous materials and protection requirements are assessed before work begins.
A look at the work
How we prepare your project
Check the site and interfaces
Review access, material condition, service isolation and required clearances.
Agree the quotation and schedule
Define responsibilities, logistics and the handover condition clearly.
Protection and material logistics
Work areas, access routes and retained building elements are agreed before work starts. Dust controls, extraction and personal protective equipment are selected for the task. Materials are separated and sent to appropriate recovery or disposal facilities.
CH
Throughout Switzerland – all 26 cantons
We work in German-speaking Switzerland, French-speaking Switzerland and Ticino. Scheduling and logistics are tailored to your site.
Zurich and Eastern Switzerland
Zurich, St. Gallen, Thurgau, Schaffhausen, Glarus, Graubünden, Appenzell Ausserrhoden and Appenzell Innerrhoden.
Northwestern Switzerland
Aargau, Basel-Stadt and Basel-Landschaft.
Central Switzerland
Lucerne, Zug, Uri, Schwyz, Nidwalden and Obwalden.
Swiss Plateau and Bern region
Bern, including Biel/Bienne, Solothurn, Fribourg, Neuchâtel and Jura.
Western Switzerland and Valais
Geneva, Vaud and Valais.
Ticino
Projects throughout Ticino according to the agreed schedule.
FAQ
Questions about quotations, preparation and handover
What do you need to prepare a quotation?
Please send the location, photos or plans, the required scope and preferred dates. Dimensions, access arrangements, existing services and any material surveys are also helpful.
What needs to be ready before work starts?
The work boundaries, access, protection measures and responsibilities must be agreed. Responsible specialists must complete any necessary service isolation, hazardous-material surveys and clearances before work starts.
How are removal and handover arranged?
Material separation, transport routes, disposal records and the handover condition are specified in the quotation. Broom-clean handover or additional cleaning is provided within the agreed scope.
More services
Deconstruction and interior demolition ↗ · Industrial dismantling ↗ · Building services dismantling ↗ · Floor covering removal ↗ · Kitchen dismantling ↗ · Bathroom strip-outs ↗ · Chimney dismantling ↗ · Clearance, disposal and recycling ↗ · Façade dismantling ↗ · Low-dust strip-outs ↗ · Concrete drilling and cutting ↗ · Transport and removals ↗ · Laboratory dismantling ↗ · Swimming pool dismantling ↗ · Paint system dismantling ↗ · Heavy machinery dismantling ↗ · Heating oil tank dismantling ↗
SEGIM Schweiz
Rückbau & Demontagen GmbH
Your reliable and
punctual partner.
Throughout Switzerland.
Our focus:
deconstruction!
Contact
Your SEGIM team
What are you planning?
Send us your project details for advice and a quotation tailored to your requirements.
Send an email ↗ info@segim.ch ↗ +41 44 844 53 61 +41 76 245 53 53
8105 Regensdorf / Zürich
Schweiz
ADDRESS
Bahnstrasse 608105 Regensdorf / Zürich
Schweiz
SEGIM SCHWEIZ
Tell us about your project
Fields marked * are required. Your enquiry is non-binding.